Products
Custom & Non-Standard Food Processing Blades
Custom and non-standard food processing blades made by drawing, sample or equipment model for food machinery.
Custom Food Processing Blades
Use this category when the required profile, mounting arrangement or cutting edge needs to be defined from a drawing or existing part. Identify which features must match the machine and which changes you want to evaluate.
Typical Applications
Typical Equipment
Materials
Material is selected by food contact, corrosion exposure, cutting load and target service life.
Edge Geometry
Edge geometry can be adjusted for clean cutting, wear resistance or easier maintenance.
Buyer Answer
What is needed to quote a custom or non-standard food machine blade?
A quote can start with a drawing, old blade photo, used sample or machine model. The key checks are the profile, mounting holes and slots, thickness, bevel direction, edge geometry, material or hardness target, quantity and delivery schedule.
- Drawing, sample or machine model
- Profile, holes, slots and thickness
- Edge direction, material and batch quantity
Specify a custom blade before making a sample
Separate replacement from redesign
For a like-for-like replacement, identify the original drawing revision and any worn dimensions. For a redesign, describe the problem and proposed change separately. Do not treat a modified profile as an approved replacement until fit and operation have been assessed.
Resolve incomplete information
A machine model or photograph helps identify the request, but may not establish every mounting dimension. Mark unknown dimensions and specify whether the drawing, old sample or another reference should control the finished part.
Keep a repeat-order reference
Agree the approved drawing, material requirement, inspection points and sample acceptance record. Reference these in repeat orders and identify any later changes before production.
Quote-ready specification
These are the details we normally confirm before sampling or batch production.
- Drawing / sample
- Drawing, old blade photo, used blade sample or equipment model can be used as the starting point.
- Key dimensions
- Outer profile / Hole and slot position / Thickness / Single or double bevel / Surface finish
- Machine fit
- Slicers / Cutters / Portioning machines / Packaging lines
- Material / hardness
- Material is selected by food contact, corrosion exposure, cutting load and target service life.
- Edge geometry
- Edge geometry can be adjusted for clean cutting, wear resistance or easier maintenance.
- Quantity / delivery
- Target quantity, sample deadline, batch delivery date and packaging request.